ILJIN IJ123050 Angular contact ball bearings

Old MRC Bearing Number:207FSF; Fillet Radius ra:1.00 mm; Basic Radial Load Rating-Dynamic DC:25500 N; Speed Rating-Single and Double Sealed Grease SDG:6300 rpm; Basic Radial Load Rating-Static SCO:15300 N; d:35.000 mm; Width - Outer Ring B0:17.0 mm; Width - Overall B:21.0 mm; Accessories:87000 Shiel

with cylindrical bore:1 700 min-1; with tapered bore:2 200 min-1; Grease:1010 kN; B:60 mm; D:240 mm; Static (Cor):11.1 mm; d:160 mm; Dynamic (Cr):6 mm; Oil:100.050 kN; rs (min):2.1 mm;

Grease Speed Rating n1:9000 rpm; Fillet Radius ra:1.00 mm; Accessories:One Shield; Oil Speed Rating n2:13000 rpm; Basic Dynamic Radial Load Rating C:19000 N; d:20.000 mm; Sealed Speed Rating n3:9000 rpm; B:20.60 mm; Basic Static Radial Load Rating Co:12000 N; D:47.0000 mm;

Bearing:22232 CCK/W33; R2:33.337 mm; P150°:120 kN; Stabilizing ring:SR-32-0; Adapter sleeve assembly:SNW 32x5.1/2; Appropriate attachment bolt size G:1 in; Mass pillow block:129 kg; Cap bolt:7/8-9 UNC; Ca:89.789 mm; Da:289.999 mm;

Tolerance shaft:h8; Tolerance housing:H7; D1:55 mm; Coefficient of friction µ min.:0.05; Specific dynamic load factor K:10 N/mm²; D:45 mm; Specific static load factor K0:20 N/mm²; Permissible sliding velocity v max.:5 m/s; B:40 mm; Coefficient of friction µ max.:0.1;

Permissible sliding velocity v min.:0 m/s; d:15 mm; D1:23 mm; Specific static load factor K0:80 N/mm²; Tolerance housing:H7; Mass bushing:0.0016 kg; Tolerance shaft:h9; B1:1 mm; Coefficient of friction µ min.:0.06; Specific dynamic load factor K:40 N/mm²;

Static (Cor):8.250 kN; da:34 min; Dynamic (Cr):13.243 kN; Weight:0.119 kg; d:30 mm; D:55 mm; Bearing designation:6006  ; Pu:0.375 kN; rs:1 mm; ra:1 max;

D1 ≈:498 mm; Comparative axial load rating CFa:254 kN; Basic static load rating C0:13200 kN; T:381 mm; d:406.4 mm; Fatigue load limit Pu:1000 kN; Basic dynamic load rating C:5700 kN; r3,4 min.:6.4 mm; r1,2 min.:1.5 mm; Comparative radial load rating CF:1220 kN;

s1:32.3 mm; Housing:FY 507 M/VZ033; d:35 mm; A3:3.2 mm; N4:4 mm; Thread grub screw G2:M10x1; Limiting speed:1100 r/min; Recommended tightening torque for grub screw:16.5 N·m; Bearing:YELAG 207; Recommended diameter for attachment bolts, inch G:0.5 in;

Basic Static Radial Load Rating Co:14000 N; D:52.0000 mm; Fillet Radius ra:1.00 mm; d:25.000 mm; Oil Speed Rating n2:11000 rpm; Basic Dynamic Radial Load Rating C:20800 N; B:20.60 mm; Sealed Speed Rating n3:8000 rpm; Grease Speed Rating n1:8000 rpm; Accessories:Two Shields & Snap-R;

Calculation factor Y2:2.3; D:400 mm; Limiting speed:1600 r/min; 2B:130 mm; Da max.:382.5 mm; ra max.:4 mm; r3,4 min.:4 mm; Mass bearing pair:71.8 kg; K:10 mm; r5 min.:1.5 mm;

d2 ≈:68.7 mm; D1 ≈:77.5 mm; Da max.:80.4 mm; B:45 mm; Operating clearance factor k2:0.096; r1,2 min.:1 mm; s2 max.:0.5 mm; Mass bearing:0.83 kg; Basic static load rating C0:335 kN; da max.:68.7 mm;

h:50.8 mm; P120°:48.9 kN; RG:3/8 NPT; Max. speed for Taconite seal:950 r/min; Ca:73.787 mm; J max.:342.9 mm; PG:1/4 NPT; P90°:77 kN; End plug (suffix Y):EPR 11; H2:50.8 mm;

Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4400 rpm; Basic Dynamic Radial Load Rating C:88000 N; Basic Static Radial Load Rating Co:71000 N; Oil Speed Rating Open/Shielded n2:5400 rpm; d:50.000 mm; Accessories:Two Shields & Snap-R; D:130.0000 mm; B:31.00 mm;

B:14 mm; B3:3 mm; G:M 55x2; d3:75 mm; Recommended grub screw tightening torque:8 N·m; Associated spanner:HN 10-11; h:3 mm; b:7 mm; Grub (set) screw size:M6; d1:67 mm;